Payment & Shipping Terms:
|Warranty:||3 Years||Weight:||10 Kg|
|Amplitude & Power:||6×300V @ 65VA Max Each||Display:||9.7inch LCD, Touch Screen|
|Keypad:||Number Key + Direction Key||Output Channels:||12 Channels|
KF86 Universal Relay Test Equipment,
6x20A Relay Test Equipment,
6x300V relay test set
KF86 Universal Relay Test Equipment Analog Output 6x20A 6x300V
Fully meet all the requirements for detection and debugging of IEC61850 IEDs, Merge Units, station control systems and traditional protection relays.Light weight: 10kg, very small size (390mm*256mm*140mm) easy carry on flight journey.
6x20A, 6x300V analog output channels.
Compact 6-phase relay test set with high accuracy & full solution (complying IEC61850 sampled value and GOOSE)
● 6x300V voltage, 6x20A current) and IEC61850 SMV messages simultaneously output;
Simulate 12-channel low level output to test the protection of low level input;
● Start up to simulate the IED to actively release GOOSE, sampled value signals, to eliminate the reset process of the device under test caused by link interruption after the test is stopped;
● The optical port output is sampled or GOOSE can be freely defined; multiple different GOOSE control block information can be subscribed/published;
● Sample value channel function, the number of channels can be set freely, up to 36 channels can be configured;
● Automatically import SCL (SCD, ICD, CID, NPI) files to realize automatic configuration of sampled values and GOOSE information, and save sample values and GOOSE configuration information as a configuration file for testing;
● It can automatically detect optical digital signals from MU, protection device and intelligent operation box, and realize automatic configuration function of sampling value and GOOSE information;
● Can simulate abnormal conditions(loss, misorder, quality abnormality, message re-transmission, data anomaly, out of step, etc.);
● The channel quality of the output SV message can be set, and the simulation unit can be simulated and debug, set to invalid, set to run state, and can simulate double AD inconsistency and other tests;
● Built-in GPS/Beidou timing module with GPS, IRIG-B code synchronization time function;
● Full-featured software test module, AC, status sequence, recloser test, distance protection, overcurrent protection, inverse time overcurrent, zero sequence protection, ramping test, power direction, differential test, frequency test, synchronize test software modules;
● With the unit test function, you can test the unit's precision, time accuracy, punctuality accuracy, and data transmission and testing functions;
● Support the graphical display of SCD files, the instrument can graphically display the IED device interconnection relationship and virtual terminal connection;
● With the IRIG-B code transmission function, when the external GPS is used, it can be used as a timing device.
Specification Of complying IEC61850 sampled value and GOOSE KF86 relay tester
|AC current source|
|Amplitude & Power||6×20A @ 300VA max each;
3×40A @ 520VA max each;
|Accuracy||±1mA @ <0.5A
<0.02%Rd+0.01Rg Typ. @ 0.5A~20A
<0.05%Rd+0.02Rg Guar. @ 0.5A~20A
|DC Current source|
|Amplitude & Power||6×10A @ 50W max|
|Accuracy||±5mA @ <1A
±0.2% @ ≥1A
|AC voltage source|
|Amplitude & Power||6×300V @ 65VA max each|
|Accuracy||±2mV @ <2V
<0.015%Rd+0.005Rg Typ. @ 2~300V
<0.04%Rd+0.01Rg Guar. @ 2~300V
|Range||Range I: 13V
Range II: 300V
|DC Offset||<10mV Typ./ <60mV Guar|
|Distortion||<0.015%Typ. / <0.05% Guar.|
|DC Voltage source|
|Amplitude & Power||6×150V @ 75W max
1×300V @ 150W max
|Accuracy||±10mV @ <5V
±0.2% @ ≥5V
|Frequency & Phase Angle|
|Frequency Range||DC ~ 1000Hz, 3000Hz transient|
|Phase Accuracy||<0.02° Typ. / <0.1° Guar. 50/60Hz|
|Electrical isolation||8 pairs of electrical isolated each|
|Input impedance||5 kΩ…13kΩ(Empty contact)|
|Input feature||0 V～300Vdc Or dry contact
(Binary input turn over potential can be programmable)
|Time measurement range||0～105s|
|Time accuracy||±1ms @ <1s
±0.1% @ ≥1s
|Debounce time||0~25ms (Software controlled)|
|Quantity||4 pairs, Fast speed|
|Type||Banana type 4.0mm|
|AC break capacity||Vmax:250V(AC)/ Imax:0.5A|
|DC break capacity||Vmax:250V(DC)/ Imax:0.5A|
|Electrical isolation||All pairs isolated|
|Satellite synchronization||1 × SMA,Use for GPS antenna interface
Support GPS and Beidou Satellite
|Fiber IRIG-B||2 × ST,1 for transmission, 1 for receiving|
|Electric IRIG-B||1 × 6Pin 5.08mm phoenix terminal
1 for transmission, 1 for receiving
|External trigger synchronization||1 × 4Pin 5.08mm phoenix terminal
external trigger input + external trigger output
|Ethernet||1 × RJ45 ,10/100M|
|WIFI||Inbuilt WIFI DHCP service|
|Serial port||1 × RS232|
|USB||2 × USB2|
|Weight & Size|
|Display||9.7inch LCD, touch screen|
|Keypad||Number key + direction key|
|Nominal voltage||220V/110V (AC)|
|Allowable voltage||85 - 265 VAC ;127V～350V(DC)|
|Power Consumption||1200VA max|
|Connection Type||Standard AC socket 60320|
Advantage Of complying IEC61850 sampled value and GOOSE KF86 relay tester
● Fully complying IEC61850 Sampling value and GOOSE; (IEC61850-9-1, IEC61850-9-2/(LE), IEC60044-7/8)
● Able to simultaneously output sampling value and analog signals, or subscriber and publish GOOSE message and relay contact binary I/O function.
● Up to 36 sampling value channels can be mapped.
12 Low-Level channels signal output function:
|Low-level signal output|
|Output channels||12 channels|
|Output port type||Phoenix terminal|
|Max current output||5mA|
|Frequency accuracy||0.002%(Normal frequency)|
Graphical software interface:
Inquiry us for more details.
Q: 1. What's your acceptable payment term?
A: T/T and L/C at sight are our normal acceptable payment terms.
Q: 2.How long is the warranty period?
A:We provide 3-years guarantee of free repair and life-long maintenance.
Q: 3.Why do we offer a three-year warranty?
A:First of all,The quality goal of KINGSINE company is that no quality failure occurs within five years of customer use.
The second,KINGSINE has been engaged in the overseas market for 12 years.Up to now,about 3000 sets of equipment have been operating overseas,and the annual failure rate is less than 1%.
The third,Our products are modular design,If there is a fault,it can be remote fault diagnosis,and then express products’ parts to customer for quick repair.
Kingsine Electric Automation Co., Ltd. has been specializing in Research & Development, production and sales of Electric Testing & Measurement Instruments since 1999 foundation who is also honored as the High-tech enterprise certification and Software enterprise certificate recognized by China authority. With about high development speed every year, Kingsine win the Chinese top manufacturer for electric test equipmentin the domestic relay-tester market.China Guodian Corporation,State Grid Corporation of China,China Southern Power Grid Company Limited and many other national companies use our products.
With ISO 9001:2008 certified Quality Management with R&D, Production and Marketing, now Kingsine's products are approved by over 70 countries worldwide in many industries of electrical power, metallurgy, petrochemical, railway mining and relative scientific research institution as well as same trade of meter and protective relays factories, and getting the warm welcome from the world large Electricity & Energy Exhibition such as POWER-GEN International of USA, Middle East Electricity of Dubai, HANNOVER MESSE of Germany and FIEE Electrical of Brazil. Its Relay-Tester is suitable working for many world famous relay protection devices such as ABB, SIMENS, ALSTOM, TOSHIBA, SCHNEIDER, AREVA, SEL, GE etc and Kingsine also give the full service with his distribution net from many countries partners of European, Asia and Middle East.
Contact Person: Yana