High Stability KT210 PT CT Analyzer For Bushing CT Testing

High Stability KT210 PT CT Analyzer For Bushing CT Testing

Description of 9.7 inch touch screen operation KT210 CT/PT Analyzer

Easy to operate CT / PT Analyzer,120V / 15A Current Output,
9.7 inch touch screen operation,
IEC60044-1, IEC60044-6, IEC61869-2, ANSI30/45 standard
High stability for bushing CT testing;

Adopt 9.7 inch touch screen TFT LCD display with clear and beautiful software interface design, user can operate easily.

● AC/DC current input for wide range only, satisfy all power supply standard requested.

● Easy to operate, measure quickly, all test can be done automatically based

on the same connection line type except overload impedance measurement.

● Adopt low voltage & variable frequency measurement method,

it can test knee point voltage up to 30kV transformer as output max voltage only is 120V

and max peak value current is 15A, high security.

● Portable design with light weight of 8kg, suitable for field test of electric power system,

manufacturing factory of current transformer or laboratory to use.

● High measurement accuracy, resistance accuracy is 0.1%+1mΩ, phase accuracy±0.05 degree,

variable accuracy is ±0.1% (1-5000 ), variable accuracy is ±0.2%(5000-10000).

● It can test current transformer according to IEC60044-1, IEC60044-6, IEC61869-2

and ANSI30/45 standard etc.

● PT Test As for those inductive PT based on the definition of GB1207-2006(IEC60044-2),

KT210 CT/PT Analyzer can also test them. KT210 CT/PT Analyzer can do variable ratio,

polarity and secondary winding excitation test of inductive PT.

Feature Of KT210 CT/PT Analyzer

Excellent noise immunity to disturbances from energized power lines close to the measurement
● CT ratio and phase measurement with consideration of nominal and connected secondary burden; CT ratio up to 10000:1
● Knee-point voltage from 1 V up to 30 kV can be Measured
● Currents from 1% up to 400 % of the rated value
● Different burdens (full, ½, ¼, ⅛ burden)
● Determination of ALF/ALFi and FS/FSi, Ts, and composite error for nominal and connected burden
● CT winding resistance measurement
● CT excitation curve (unsaturated and saturated)
● Saturation characteristic recording
● Direct comparison of excitation curve to a reference curve
● CT phase and polarity check
● Secondary burden measurement
● Automatic demagnetization of the CT after the test
● Small and lightweight (< 8 kg)
● Short testing time due to fully automatic testing
● High level of safety using patented variable frequency method (max. 120 V)
● "Nameplate guesser" function for CTs with unknown data
● PC control interface

Specification Of KT210 CT/PT Analyzer

● Complete measurement function, it can test all type current transformer

for secondary overload,

secondary loop resistance, excitation characteristic, transient characteristic,

ratio difference, angle difference and polarity.

It can also test exact limit coefficient(ALF), device security coefficient(FS),

secondary time constant(Ts), remanence coefficient(Kr), transient area coefficient(Ktd),

inflexion voltage, current, level, saturation inductance,

un-saturation inductance, 5% 10% error curve, of current transformer,

hysteresis loop for current transformer,

and evaluate test result according to defined standard.

Advantage Of KT210 CT/PT Analyzer

Auto Demagnetizes
● Software-based tool to determine the residual magnetism in current transformers
● Analysis of the remanence condition before putting into operation the CT to assure proper function
● Simplifies power grid failure analysis after unwanted operation of protective relays
● Demagnetizes the CT core after measurement

F&A

Q:1.What is your quality management system?

A:Our quality is up to GB/T19001-2016/ISO9001:2015 standard,and we have the certificate

Q: 2.What is your advantages?

A: KINGSINE have been specializing in electric power testing & measurement for over 22 years. All-in-One design concept, high power burden & high output accuracy but with high cost-efficiency, 3-years guarantee of free repair and life-long maintenance.

Q: 3.Do you have any MOQ limit?
A: MOQ is 1 set. Please feel free to contact us for more detail.

Q:4.How about your after-sales service?

A: We are original manufacturer and always give best and soonest after-sales service.our chief engineer Mr.Terry had travelled to different countries for providing onsite technology support,and our sales managers always provide after-sales service positively.

About Us:

Kingsine Electric Automation Co., Ltd. has been specializing in Research & Development, production and sales of Electric Testing & Measurement Instruments since 1999 foundation who is also honored as the High-tech enterprise certification and Software enterprise certificate recognized by China authority. With about high development speed every year, Kingsine win the Chinese top manufacturer for electric test equipmentin the domestic relay-tester market.China Guodian Corporation,State Grid Corporation of China,China Southern Power Grid Company Limited and many other national companies use our products.

With ISO 9001:2008 certified Quality Management with R&D, Production and Marketing, now Kingsine's products are approved by over 70 countries worldwide in many industries of electrical power, metallurgy, petrochemical, railway mining and relative scientific research institution as well as same trade of meter and protective relays factories, and getting the warm welcome from the world large Electricity & Energy Exhibition such as POWER-GEN International of USA, Middle East Electricity of Dubai, HANNOVER MESSE of Germany and FIEE Electrical of Brazil. Its Relay-Tester is suitable working for many world famous relay protection devices such as ABB, SIMENS, ALSTOM, TOSHIBA, SCHNEIDER, AREVA, SEL, GE etc and Kingsine also give the full service with his distribution net from many countries partners of European, Asia and Middle East.