|
Product Details:
Payment & Shipping Terms:
|
| High Light: | ct current transformer,ct and pt transformers,Current Transformer Analyzer |
||
|---|---|---|---|
Auto Demagnetizes
| ● | Software-based tool to determine the residual magnetism in current transformers |
| ● | Analysis of the remanence condition before putting into operation the CT to assure proper function |
| ● | Simplifies power grid failure analysis after unwanted operation of protective relays |
| ● | Demagnetizes the CT core after measurement |
PC Control Available
| ● | Full access to all functions of the KT210 via a PC using the RJ45 interface |
| ● | Optimizes the integration into automated testing procedures in production lines |
| ● | Data export into Word |
| ● | Customizable testing and reports |
Data Handling and Reporting
| ● | Test reports can be saved on the local host and transferred to a PC |
| ● | Data and protocols can be shown on a PC via the Word file loader program |
"Guessing" Nameplates(Reference for unknown CT)
| ● | Determination of unknown CT data |
| ● | Older CTs can be classified and put into service without contacting the manufacturer |
| ● | Determinable parameters include: |
| CT type | |
| Class | |
| Ratio | |
| Knee point | |
| Power Factor | |
| Nominal and operating burden | |
| Secondary winding resistance |
Technical Features
| ● | Excellent noise immunity to disturbances from energized power lines close to the measurement |
| ● | CT ratio and phase measurement with consideration of nominal and connected secondary burden; CT ratio up to 10000:1 |
| ● | Knee-point voltage from 1 V up to 30 kV can be Measured |
| ● | Currents from 1% up to 400 % of the rated value |
| ● | Different burdens (full, ½, ¼, ⅛ burden) |
| ● | Determination of ALF/ALFi and FS/FSi, Ts, and composite error for nominal and connected burden |
| ● | CT winding resistance measurement |
| ● | CT excitation curve (unsaturated and saturated) |
| ● | Saturation characteristic recording |
| ● | Direct comparison of excitation curve to a reference curve |
| ● | CT phase and polarity check |
| ● | Secondary burden measurement |
| ● | Automatic demagnetization of the CT after the test |
| ● | Small and lightweight (< 8 kg) |
| ● | Short testing time due to fully automatic testing |
| ● | High level of safety using patented variable frequency method (max. 120 V) |
| ● | "Nameplate guesser" function for CTs with unknown data |
| ● | PC control interface |
| ● | QuickTest: Manual testing interface |
| ● | Color display readable in bright sunlight |
| ● | Simulation of measured data with different burdens and currents |
| ● | Easily adaptable reports (customizable) |
| ● | Knee-point voltage from 1 V up to 30 kV can be Measured |
| ● | Automatic assessment according to IEC 60044-1, IEC 60044-6, IEC61869-2, ANSI30/45 |
| ● | Automatic assessment for accuracy class > 0.1 |
| ● | Measurement of transient behavior of TPS, TPX, TPY and TPZ type CTs |
| ● | PT ratio, polarity and excitation curve according to IEC60044-2 |
Contact Person: Amy
Tel: +8613603051120
| Sales office:6/F, Block 4-CD, TianAn Cyber Park, Futian District, Shenzhen 518048,.China | |
| +86-755-83418941 | |
| international@kingsine.com | |
