|
Product Details:
Payment & Shipping Terms:
|
| SV Message Output Dispersion: | ≤±80ns | USB Port: | 1 |
|---|---|---|---|
| Fiber Serial Port Transfer Delay: | ≤100ns | Display: | 10.4 Inch High-definition Capacitive LCD Screen (touch Screen) |
| Size: | 320mm×250mm×100mm(L×W×H) | Weight: | <2.75kg |
| High Light: | IEC61850 KF900A,IEC 61850 Relay Test Device,IEC 61850 Overcurrent Relay Tester |
||
IEC61850 KF900A Overcurrent Protection Relay Test Device
Description Of Primary Device Test Kit
Relay protection microcomputer test device plays a key role in operating electricity power systems reliably and safely. It is the testing device used in professional field of microcomputer protection, relay protection, excitation measurement, fault recorder.
Feature Of Relay Test Conform IEC61850
| ● | The smallest digital relay tester, 10.4 inch high-definition capacitive LCD screen, the whole machine full touch screen operation; |
| ● | Universal protection relay test function, With fully function of Manual test, state sequencer, Harmonic, recloser test , Line differential, Distance, Mutation distance, Overcurrent, Zero sequencer, Ramping, Power direction, Differential rate, Differential Harmonic, Overexcitation protection, Synchronize, Reserve power supply test, Busbar differential, Frequency test, Dv/Df test, etc. |
| ● | With MMS communication service function, Real-time monitoring sampling value,binary input/output, warning event of protection relay and measurement&control device. Support protection relay setting online reading,modify and setting area switch. Support relaying plate enable/disable,switch on/off. |
| ● | With secondary virtual terminal circuit auto test function, By sending SV and GOOSE message, and receiving MMS feedback which formed closed loop, realize automatic test of virtual terminals; |
| ● | Supports consistency check of IED device model files. Obtain the IED device model online through MMS, compare it with the local SCD model file, and get the consistency result of model; |
| ● | With background and substation control layer test function, by importing SCD file, it can simulate the protection, measurement & control device to send remote measure signal, remote control signal and other signals, access the station control layer network through MMS protocol, communicate with background and remote device, convenient and fast triggers all alarm events, changes the switch state ON or OFF, and current, voltage, and power values to achieve a point-to-point test with the monitoring background or the master station; |
Specification Of Current Transformer Test Set
| Item | Parameters |
| Fiber Port | 8 pairs, LC type port, wave-length 1310nm One of the optical ports is a dedicated 1000M optical module, which is suitable for 1000M networks. |
| Fiber serial port | 8, ST type port, wave-length 850nm 6 sending, 2 receiving (Can be used as FT3 or IRIG-B) |
| Ethernet port | 1,100Base-TX,RJ45 |
| USB Port | 1 |
| GPS Port | 1 channel, GPS signal receiver internal |
| Analog input port(Optional) | 4 or 8 pairs, 18 bit AD, 40kHz sampling rate, input range 0-250VAC |
| Hard contact binary input | 1 Pair, Adaptive empty contact or potential contact (30~250V), response time ≤500μs |
| Hard contact binary output | 1 pair, Open-collect type, blocking capacity more than 250V, 0.3A (DC), response time ≤ 100μs |
| Measure accuracy | Voltage and current measurement accuracy error ≤0.05% Frequency accuracy is better than 0.001Hz in the range of 15~1000Hz Phase measurement accuracy error ≤0.01° |
| sending Accuracy | voltage and current measurement accuracy error ≤0.05% Frequency accuracy is better than 0.001Hz in the range of 10~1000Hz Phase output accuracy error ≤0.01° |
Advantage Of Current Transformer Test Kit
Comprehensive test instrument develop based on intelligent substation testing, mainly function is protection relay testing, sampling value analysis, SCD file analysis/comparison and MMS service. Suitable for detection and testing of IED equipment such as intelligent substation protection relay, measurement and control device, merge unit and intelligent terminal. Also can used in signal check of substation control layer.
FAQ
Q: Can the relay protection tester show the impedance curve?
A: Yes.
Q: What is your technical advantages?
A: Universal protection relay test function, With fully function of Manual test, state sequencer, Harmonic, recloser test , Line differential, Distance, Mutation distance, Overcurrent, Zero sequencer, Ramping, Power direction, Differential rate, Differential Harmonic, Overexcitation protection, Synchronize, Reserve power supply test, Busbar differential, Frequency test, Dv/Df test, etc.
Q: How long is the warranty period?
A: 3-Years guarantee of free repair and life-long maintenance
Contact Person: Amy
Tel: +8613603051120
| Sales office:6/F, Block 4-CD, TianAn Cyber Park, Futian District, Shenzhen 518048,.China | |
| +86-755-83418941 | |
| international@kingsine.com | |
