Engybrick Distributed Intelligent Power Monitoring Module

Engybrick Distributed Intelligent Power Monitoring Module

● Multiple Loop Circuit Connection

● Easy Installation

● Convenience of Installation and maintenance

● Cost Saving

Basic System Configuration

■1 PCS Display module     ■1 PCS Voltage measuring module  ■Multi current measurement modules       ■Current Transformer

Advantage of Engybrick System

1. Engybrick, a system of Distributed Intelligent Power Monitoring Modules, is certain to bring a revolutionary

    change regarding to the on-site installation and system cost control.

2. Being different from the traditional all-in-one integrated multifunctional power monitors, Engybrick is designed

    as a number of individual modules,namely,voltage module,current module,communications module,power

    supply module and display module.

3. With the design for DIN-rail mounting, the system can be configured flexibly. The system is provided with

    EngyBus, a high-speed data bus developed by KINGNEN, and the RJ45 connection,which can be used by all

    the modules in common,making the system installation an easy job and thus huge amount of labor,time and

    money is saved.

4. So Engybrick is a good substitute for the traditional power monitoring meters,suitable for the applications of

    Power Management solution,MV/LV switchgear.It can also be used in the side unit of a cabinet row or as the

    substitute for intelligent PDU.

5. Special Technology : Real time data base; EngyBus, the internal high-speed Bus

6. Online upgrade available.

EBU10   

Engybrick U module can measure voltage parameters of the whole system.

EngyBus RJ45 cable can be used for power transmission and measurement voltage parameters for all devices.

EBI10

Engybrick I module can measure the current parameters and power consumption of the closest load. And these multi current measurement modules can be flexibly configured to the load to be measured, or monitor independent current input. For example: 1 three-phase load & 3 single-phase load

RJ45 and RJ12 interface can be easily and quickly connected to various current modules and current transformers, and automatically configured current transformer connection:Communication address/Load type/Transformer type and ratio/Automatic classification and verification of the flow direction of the current/Prevent wiring errors/Simplified transformer configuration.

EBD10

Engybrick D Display module

EBC10

Engybrick C Data Concentrator Module

EBG10

Engybrick G Smart Gateway module

 EBR10

Engybrick R Repeater Distance Module

EBT10

Engybrick T Current Transformer module